Kay Gee Inflatable Boats
Direct: (780)237-9757
Sales: (780)906-4991

SEAMAX HD 330 BOATS

$2,295.00

The SEAMAX HD 330 Boats are a 10.8 Ft PVC Inflatable Boat, Max 4 Passengers and 15HP Rated.

SKU: N/A Category:

FEATURES

Features
Non-skid sectional aluminum floor or light weight high pressure airmat. Transom motor pad and pull-up style drain valve. Reinforced transom to pontoon adapter. Pre-installed multiple utility D-ring patches. 3x front towing rings. 2x transom towing rings. 4x tie-down style handles. Oar lock set installed.

EASY TO GO
Easy to set up. This recreational inflatable boat will take you for a fun day of exploration at the bay, river or lake. It will take you there, away from the waters edge and closer to the fish. If you like to spend weekends being closer to nature, then an inflatable boat is for you. If you have an RV or go camping, most likely you will be near the water. Take an inflatable boat with you. Once deflated and folded, SEAMAX inflatable boat takes up about as much space as a medium bag. You can store it in the trunk of a car, locker, under the stairs or in the corner of the garage, ready for the next weekend or holiday.

STABLE
Inflatable boats have a low center of gravity. It is practically impossible to capsize it. Whether stationary or cruising. SEAMAX inflatable boats are always stable. You can stand up when fishing. Children are safe. Mooring is simple. Seamax is great as a family boat.

QUALITY STANDARD
Seamax Boats have Exceptional quality workmanship that is unmatched by most other boats. All models are registered with Transport Canada and follow the Small Vessel Manufacturer Standard to build, Seamax boats are also recognized by US Coast Guard & DMV Office.

SPECIFICATIONS

EXTERIOR – 10.8 FEET LONG X 5.0 FEET WIDE
INTERIOR – 7.2 FEET LONG X 2.2 FEET WIDE
PONTOON SIZE – 16.5 INCHES
AIR CHAMBERS – 3 + 1
SEAMS – Double Thermal Welded
WEIGHT – 100 LBS (AIRMAT FLOOR) / 120 LBS (ALUMINUM FLOOR)
MAXIMUM CAPACITY – 1079 LBS | 4 Passengers
MAX PRESSURE – 3.6PSI (25kPa)
MAXIMUM HP – 15 HP SHORT SHAFT TRANSOM

This SEAMAX HD 330 is finished with double thermal welded chamber seams & double overlapped, this structure can help the boat last much longer and comes with 4 years guarantee.

Additional Specs:

  • Marine Grade PVC coating fabric for pontoon construction;
  • Thicker 1.2mm material for the entire boat bottom.
  • Heavy-duty lifeline around the entire boat.
  • Secondary lifeline on the inside of the boat;
  • Marine grade 1.5″ thick birch plywood transom;
  • Heavy-duty rubbing strake around the boat and keel bottom.

Accessories:

  • Aluminum bench seat(s).
  • Aluminum oars.
  • Heavy-duty boat hull and floor carrying bags.
  • Front towing line.
  • Foot pump, repair kit and spare parts kit.

STABILITY:

Inflatable boats have a low center of gravity. It is practically impossible to capsize it. Whether stationary or cruising. SEAMAX inflatable boats are always stable. You can stand up when fishing. Children are safe. Mooring is simple. Seamax is great as a family boat.

AIR CHAMBER SEAMS

When we talk about the latest air chamber seam standard, Hot (Air) Welded and Thermo Bonded belong to the same type of seam processing. The main chamber seam staying together is no longer using just PVC glue. So the air chamber seam won’t be damaged with time or daily use. The PVC glue lifetime is 3-10 years based on workmanship and condition of use. Hot welded (or Thermo welded) seam may reduce over 50% of major boat repairs and extends the boat lifetime to over 10-15 years.

Seamax has been making our Ocean Series and Ocean T Series inflatable boats with hot welded seams since 2017. We use the overlapped major seam structure to allow the chamber fabric to stay together by itself without the need for additional seam tape. Seamax still uses seam tape as an add-on to give the boat an extra welded seam. We refer to this as being Double Hot Welded.

The PVC boat industry standard is joined chamber seam. This dramatically reduces any chance of air leaking after finished. Usually, the same style of overlapped major seam structure can be found in high-end Hypalon boats. Boats using over-lapped seams will use more material to build and many extra hours to construct. In the meantime, it requires better-skilled workers to make it right. Now we can be confident to tell that our chamber seam’s lifetime will be the same as the fabric’s lifetime. In other words, when the boat’s lifetime has ended, it will not be from chamber seam issues.

Right now, all our Seamax boat manufacturing is the same. Hot welded seam for PVC brings the boat’s overall quality much closer to the Hypalon boat. Seamax boats use German PVC ensuring Seamax Boats are of the highest standard in the inflatable boat industry.

0
    0
    Your Cart
    Your cart is emptyReturn to Shop
    Europa Canopy & Marine