$98.00 – $122.00
With 1″ Aluminum Pole and 360 Degree Solid Eye Ends
Size A = Pole Length 36", Size B = Pole Length 42", Size C = Pole Length 48"
Product Key Features
Boat Bimini (Rear) Support Pole system is an important option for your Bimini top. It will let your Bimini top stay at 45 degree position when folded. It will make your Bimini top more professional and easy to use. We have 3 sizes for the Support Pole system.
Size A – Pole Length 36”, Designed for Seamax Bimini top Size A & B; Suitable for inflatable boats up to 11ft and most Aluminum or fiberglass boat up to 13ft.
Size B – Pole Length 42”, Designed for Seamax Bimini top Size C & D; Suitable for inflatable boats up to 16ft and most Aluminum or fiberglass boat up to 18ft.
Size C – Pole Length 48”, Designed for Seamax Bimini top Size E & F; Suitable for inflatable boats up to 20ft and most Aluminum or fiberglass boat 19ft or up.
Special Eye End fitting installed to offer the pole 360 Degree turning. It will be much flexible for your installation and save your time. New version released and Best quality in the market.
If we want to use this kit for your existing Bimini top repair or upgrade. You should have enough spare parts in this package to offer the job.
To resize the pole, you can drill out the rivet from one side of the Eye End, then use a table saw to cut the pole shorter. You can put the eye end back by rivet. Additional aluminum rived is included.
Parts check list: 2 x Aluminum Support Pole with both end fitting installed. 2 x Nylon deck mounting, 4 x Pole Connector with wind nut, Stainless steel hardware, Aluminum rivet.
Note: Seamax Boat Bimini (Rear) Support Pole system does not include Bimini Top. Seamax Bimini top standard package does not include the Rear Support Pole set.
It is an option for your Bimini top. Product has 2 years limited warranty.